Mitutoyo VL-50A Manual do Utilizador descarregar pdf (Página 4)

11 10 9 8 18 17 13

3 1 2 4 7 5

1 10 9 8

2 3 5 6 7 4

1 8 4

2 3 5 6 7

Key functions

Key Function

1) Up Moves the spindle up while the key is pressed. Used to

retract the contact point from the workpiece after making a

measurement.

2) Down Moves the spindle down while the key is pressed. Used to

bring the contact point into contact with the workpiece to

make a measurement.

3) Rapid Up Moves the spindle up rapidly while the key is pressed. Used

to move quickly from one position to another.

4) Rapid

Down

Moves the spindle down rapidly while the switch is pressed.

Used to move quickly from one position to another.

5) ZERO Sets the origin at the current position of the contact point

and zeros all display values for runout measurements. This

key can also be used to clear an error.

6) PRESET Sets the origin at the height value entered relative to the

current position of the contact point. Standard workpieces or

gauge blocks are often used with this function.

7) MODE Selects and sets one of various measurement modes such as

MAX/MIN measurement.

8) LIMIT Enters the size limits for a GO/NG tolerance judgment

measurement.

9) TEACH Sets up the position memory.

10) PM1

to PM3

Moves the spindle to an arbitrary position that has been

stored with a single keystroke.

Indicator functions

Indicator Function

11) GO/NG The result of a GO/NG measurement is being displayed.

12) Sign Indicates a minus value.

13) MAX Maximum value mode. Both lights are on while

in runout mode.

14) MIN Minimum value mode.

15) WORK Shows that a workpiece is being measured.

16) T.H. Measured value is held in display after measurement has been

completed.

17) C.T. User compensation is set to ON. (Lights while the position

memory is active.)

18) UNIT The display value unit is inches. (Lights in the external HOLD

mode.)

1) Measured data output

connector (OUT)

RS-LINK connector

(IN / OUT)

Outputs measured data

to a Digimatic mini-processor, etc.

Connects multiple devices and can output

measurement data from one RS-232 port.

2) RS-232C connector For communication with a PC, etc.

3) External control connector Used to connect this instrument

to an external device for remote control.

4) GND terminal —

5) Input connector

for foot switch

Foot switch (optional) for controlling

measurement operation is connected here.

6) DC IN Input connector to receive power from the

AC mains adapter.

7) Power switch —

8) AC adapter cord clamp Prevents AC adapter cord from pulling out.

9) CONTROL connector:

for VL-50AS only

Gage head connector.

10) INPUT connector:

for VL-50AS only

Gage head connector.

VL-50A

VL-50AS/AH

Control panel/Display

Functions

Rear panel (switches and connectors)

WWW.100Y.COM.TW WWW.100Y.COM.TW WWW.100Y.COM.TW

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

Mitutoyo VL-50A Manual do Utilizador Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo Mitutoyo VL-50A