Mitutoyo TM-500 Series Manual do Utilizador Página 15
- Página / 42
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
2.4 Checking and Adjustment
2.4.1 Checking the reticle position against the XY stage
movement direction
1䋮 Place a small workpiece on the stage glass and bring it into focus.
2䋮 Turn the Micrometer Heads to align an edge of the workpiece with the center of the cross-hair.
3䋮 While turning the Micrometer Head to move the workpiece left and right, turn the angle dial so
that the horizontal cross-hair is oriented to coincide with the direction of the stage movement.
㪋㪅 Loosen the vernier clamp screw. Align the “0” graduation on the angle dial with that of the
vernier scale. Ensure the margin is sufficient for adjusting the vernier scale position. If space for
adjusting the vernier scale position is limited, re-adjust the vernier scale position by referring to
"2.4.3 (1) Adjusting the reticle to the XY stage movement direction".
㩷
㩷
2.4.2 Checking the centering of the reticle㩷
Small workpiece
To perform dimensional measurement by turning the angle dial or after replacing the reticle, align the
cross-hair with the center of rotation of the angle dial, as follows.
㩷
1䋮 Place a small workpiece on the stage glass and bring it into focus.
2䋮 Turn the Micrometer Heads to align an edge of the workpiece with the center of the cross-hair.
3䋮 Turn the angle dial 180q. Make sure the edge of the workpiece remains within 3μm of the center of the
cross-hair. If it is not within 3μm, adjust the center of the reticle by referring to "2.4.3 (2) Centering
the reticle".
2. Installation and setup
13
- TM-500 Series 1
- CAUTION㩷 3
- PRECAUTIONS 4
- WARRANTY 5
- CONTENTS 6
- Outline㩷 9
- 1.1 Description 9
- 1.2 Name of Each Part 10
- 13. Control panel 11
- 1.Outline 12
- Installation and Setup㩷 13
- 2.1 Package Contents 13
- 2.2 Installation Site 13
- 2.3 Setting-up 14
- 2.4 Checking and Adjustment 15
- 2.4.3 Adjusting the reticle 16
- Small workpiece 17
- 2. Installation and setup 17
- Measurement㩷 19
- 3.1.2 Replacing the lenses 20
- 3.1.3 Fixing the workpiece 20
- 3.1.4 Illumination modes 21
- (1) Contour illumination 21
- (2) Surface illumination 21
- 3.1.5 Replacing reticles 22
- 3.1.6 Adjusting the diopter 22
- 3. Measurement 23
- 3.2 Measurement 24
- 3.2.2 Angle measurement 25
- 3.2.4 Step measurement 26
- Maintenance 27
- 4.1 Cleaning and Lubrication 27
- 4.2 Inspection 27
- 4. Maintenance 28
- (1) Replacing the fuse 29
- (2)Replacing the stage glass 29
- Troubleshooting 33
- 5. Troubleshooting 34
- Specifications 37
- (6)Surface illuminator 38
- (8)Main unit dimensions 38
- Optional Accessories 39
- 7. Optional Accessories 40
- Reference Diagrams 41
- TM-510/510R 42
- Detail drawing of T-groove 42
Manuais e produtos relacionados com Medição, teste e controlo Mitutoyo TM-500 Series
(8 páginas)Reese 44026 PROFESSIONAL RECEIVER podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Do samochodu Reese 44026 PROFESSIONAL RECEIVER.
Dostarczamy 1 pdf podręczników Reese 44026 PROFESSIONAL RECEIVER do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comentários a estes Manuais